Pentair S5-Q Replacement Cartridge
Pentair S5-Q Replacement Cartridge: High-Performance Pool Filter for Clean and Clear Water
Introducing the Pentair S5-Q Replacement Cartridge. This exceptional 15-inch Qwik-Twist cartridge is engineered with advanced PolyTrix gradient-density filtration media, ensuring a reduction of sediment down to 5-microns. Designed for efficiency, it boasts a flow rate of 2.25 gallons per minute, supporting up to 22,500 gallons.
System Benefits
- Superior Filtration: The S5-Q cartridge employs gradient-density depth filtration to effectively capture dirt, rust, and other particles as small as 5-microns.
- Extended Lifespan: By safeguarding primary QT system cartridges from early clogging, the high-capacity S5-Q cartridge prolongs the filtration system’s operational life and minimizes maintenance requirements.
- Ease of Use: Featuring a ¼ turn QT Qwik-Twist bayonet cartridge, it simplifies filter replacement, making the process quick, easy, and hygienic.
Application
Designed as a HIGH-CAPACITY PRE-FILTER, it is compatible with all specified QT Series Systems.
Installation Tips
- Avoid exceeding the cartridge’s specifications for temperature and pressure.
- Ensure there’s at least a 3-inch clearance below systems for easy filter housing removal and cartridge replacement.
- Connect the feed-water to the system using COLD water only.
Pentair S5-Q Replacement Cartridge
Technical Specifications
- Dimensions: 17.5 inches in height, 3.9 inches in width, and depth.
- Operating Pressure Range: 10 – 125 psi (0.7 – 8.6 bar).
- Inlet Water Temperature Range: 35˚ – 100˚F (2˚ – 38˚C).
- Shipping Weight: 5 lbs.
Performance
- Chlorine, Taste, and Odor Reduction Capacity: N/A.
- Service Flow Rate: 225 gpm (8.50lpm).
- Sediment Reduction: 5 microns (nominal).
System(s) Cartridge Used In
Model |
Part Number |
QTY |
QT-1+ |
160-52051 |
1 |
QTC-1+ |
160-52061 |
1 |
QT-2+ |
160-51005 |
1 |
QTC-2+ |
160-51007 |
1 |
QTI-1+ |
160-52055 |
1 |
QTCI-1+ |
160-52065 |
1 |
QT-2+ |
160-51010 |
1 |
QTCI-2+ |
160-51012 |
1 |
Water Cartridge Replacement Tips
- It’s advised to change pre/post-filters and mineral addition cartridges every 6 months, or sooner if capacity is reached or if feedwater pressure or flow decreases.
- Membrane lifespan can vary, typically lasting 12-18 months under standard conditions, but potentially extending to 3-5 years depending on feedwater conditions and pre-filter maintenance.
- This commercial-grade product should be installed and maintained according to the manufacturer’s guidelines.
- Do not use with water that is microbiologically unsafe or of unknown quality without proper disinfection before or after the system.
This guide provides essential information on the Pentair S5-Q Replacement Cartridge, ensuring you understand its benefits, application, installation tips, specifications, performance, and maintenance advice for optimal use.
California Residents: Proposition 65 Warning applies to this product.